Pumps

Centrifugal Pumps

3/4 HP Fixed Speed Centrifugal Pump
$ 2,247.00 USD
3 HP Fixed Speed Centrifugal Pump
$ 4,306.00 USD
2 HP Fixed Speed Centrifugal Pump
$ 2,498.00 USD
10 HP Fixed Speed Centrifugal Pump
$ 6,809.00 USD
1/2 HP Fixed Speed Centrifugal Pump
$ 2,234.00 USD
1.5 HP Fixed Speed Centrifugal Pump
$ 2,328.00 USD
1 HP Fixed Speed Centrifugal Pump
$ 2,298.00 USD

Cart Pumps

2 HP Cart Mounted Variable Speed Centrifugal Pump
$ 3,916.00 USD
1.5 HP Cart Mounted Variable Speed Centrifugal Pump
$ 3,754.00 USD
1 HP Cart Mounted Variable Speed Centrifugal Pump
$ 3,624.00 USD
3/4 HP Cart Mounted Variable Speed Centrifugal Pump
$ 3,504.00 USD
1/2 HP Cart Mounted Variable Speed Centrifugal Pump
$ 3,474.00 USD

Seal Kits & Replacement Parts

Ampco Pump Seal Kit (PMP-CB+114-IN-SEALKIT)
$ 185.00 USD
Topline Pump Seal Kit
$ 64.00 USD
Ampco CB+114 Pump Replacement Parts
$ 0.00 USD

Cellar Controls

Basic Jacket Panels

Our Basic Jacket Panels are perfect for breweries already running a Brewmation system with Basic Brew House Controls, or for any brewery (even those without Brewmation equipment) that is looking to upgrade their cellar control system. Chose from single point or multi-point panels with up to 12 control points per panel.

The Basic panels operate on 120V power and require a set of temperature probe and solenoid cable for each point. If you already have solenoid that you would like to use, give us a call with your specs and we'll provide a custom design.

Advanced Jacket Panels

Our Advanced panels are designed to be operated through a the touchscreen interface on our Advanced Brew House Panels. The Advanced Jacket Panel is wired to the Advanced Brew House Panel with an ethernet cable. If more control points are needed for your expanding cellar, the module Advanced Panels can be chained together with additional ethernet cables, providing a single point of access for all of your cellar tanks.

If you do not have an Advanced Brew House Panel, you will need to begin with our PLC Interface Control Panel to provide the touchscreen interface. From there, you can add as many Advanced Jacket Panels as needed (up to 32 points.) Give us a call to learn more.

Lead Time & Shipping

Please note that Jacket Panels are  built to order and lead time can vary. Lead time for single point controls is approximately 2-4 weeks. Lead time for Basic and Advanced multi-point Panels is approximately 6-8 weeks. Please contact us if you have questions about lead time or need an expedited order.

Please select whether you will require residential and/or liftgate service upon delivery below if ordering multi-point panels. If nothing is selected, shipping will be calculated shipping based on standard residential delivery. Changes to this will incur an additional charge prior to shipping. A Customer Service representative will contact you to when your order is ready to ship.

It is important to chose the correct jacket panel that will work with your system. After placing an order, one of our Brewery Specialists will review your order and contact you to confirm specs. If you would like to review before placing an order, give us a call!

Jacket Panels

Single Point Control
$ 266.00 USD
Basic Jacket Panel
$ 1,605.00 USD
Advanced Jacket Panel
$ 2,608.00 USD
Delivery Options
$ 0.00 USD

Temperature Probes

Temperature Probe - Jacket Panel
$ 220.00 USD
Temperature Probe - Chiller Output
$ 303.00 USD
1" Solenoid Valve for Glycol Loop (SOL-1"-SS)
$ 254.00 USD

Flow Rate and Pressure Examples

Topline C-100 external seal pump flow examples:
Ampco CB+114 internal seal pump flow examples:

1/2HP & 3/4HP fixed speed pumps (low RPM)

High pressure low flow:
10GPM at 7PSI (17ft of head)
High flow low pressure:
34GPM at 4.3PSI (10ft of head)

1/2HP & 3/4HP fixed speed pumps (low RPM)

High pressure low flow:
21GPM at 7PSI (17ft of head)
High flow low pressure:
70GPM at 4.3PSI (10ft of head)

1/2 HP (variable speed)

High pressure low flow:
10 GPM at 21.7PSI (50ft of head)
High flow low pressure:
20 GPM at 17.3PSI (40ft of head)

1/2 HP (variable speed)

High pressure low flow:
5 GPM at 31PSI (65ft of head)
High flow low pressure:
24GPM at 17.3PSI (40ft of head)

3/4 HP (variable speed)

High pressure low flow:
22 GPM at 21.7PSI (50ft of head)
High flow low pressure:
34GPM at 17.3PSI (40ft of head)

3/4 HP (variable speed)

High pressure low flow:
13 GPM at 31PSI (71ft of head)
High flow low pressure:
38GPM at 17.3PSI (40ft of head)

1 HP fixed speed (high RPM)

High pressure low flow:
36 GPM at 21.7PSI (50ft of head)

1 HP fixed speed (high RPM

High pressure low flow:
22 GPM at 31PSI (71ft of head)

1HP (variable speed)

High pressure low flow:
36 GPM at 21.7PSI (50ft of head)
High flow low pressure:
45GPM at 17.3PSI (40ft of head

1HP (variable speed)

High pressure low flow:
22 GPM at 31PSI (71ft of head)
High flow low pressure:
58GPM at 17.3PSI (40ft of head)

1 1/2 HP (variable speed)

High pressure low flow:
36 GPM at 21.7PSI (50ft of head)
High flow low pressure:
60GPM at 17.3PSI (40ft of head)

1 1/2 HP (variable speed)

High pressure low flow:
36 GPM at 31PSI (71ft of head)
High flow low pressure:
86GPM at 17.3PSI (40ft of head)